100 V General Purpose Motor Controller
FOC Brushless (BLDC/PMSM) & Brushed DC
Typical Applications: Cargo bikes, e-bikes, quadricycles, AGVs, agricultural automation and other applications where reliability and safety matter
Phase Current (cont. /peak):
Supply Voltage (VIN):
Dimensions (WxLxH):
Connections:
Weather Proofing:
The RFLX CORE is our rugged powerplant for applications running below 100 A continuous current, with peak currents beyond 200 A. Fully potted and equipped with IP67-rated connectors, it is built to keep working when conditions get rough.
We boiled it. We deep-froze it. We even used it to drive nails into a wall.
If your operating environment is harsh, the CORE is built for it.
And there is more to the CORE than sheer physical toughness. It packs a versatile set of power and connectivity features into a compact package: a software-switchable 24 V / 1 A rail, two software-switchable 12 V / 1 A rails, and a 5 V output. Connectivity includes UART, three analogue inputs, two CAN interfaces, USB, and two GPIOs.
An external input allows the CORE to be reliably switched on and off. For applications where critical information must be preserved, the processor can remain powered while the main system is shut down — keeping data such as sensor calibrations safely available.
These capabilities make the RFLX CORE particularly well suited to cargo bikes, e-bikes, quadricycles, AGVs agricultural automation, and any other application where reliability and safety matters.
The CORE is part of the RFLX (pronounced Reflex) controller family, here to set a new standard in motor control. You have to try it yourself to see how simple the setup can be and how it feels when razor-sharp precision pairs up with uncompromised performance. No legacy clutter, FOC at its best and for you.
You know that feeling when technical issues are in your way and progress stalls? We started with the vision of creating a product that is simple to use, outperforms the existing solutions, and can be trusted when it matters. The controller you would choose if you want to build the best version of your product.
Dynamesys hardware was developed from the ground up alongside a new firmware and software stack. Built on decades of combined motor-control expertise, the Dynamesys Firmware and Workbench delivers a new generation of high-performance motor control — powerful, precise, and remarkably simple to use.
The result: a clutter-free, razor-sharp tool that is intuitive to use while offering advanced data-analysis capabilities.
A key focus was making motor detection and setup as straightforward as possible, delivering high accuracy and repeatability, every time.
Many of our customers have been able to eliminate motor sensors altogether, making controller installation and replacement a true plug-and-play experience
Core Features
Modes:
Data Analysis
Additional Features
Protection
The RFLX controller actively monitors and protects against:
Compatibility
Over CAN, controllers recognise each other automatically. Set up an entire bus from a single connection — firmware updates included. CANopen, DroneCAN and VESC® (command & status) come out of the box. Need another protocol, or your own? We’ll implement it.
*Certain Dynamesys devices can be flashed and operated with VESC®-based firmware. Users can switch between Dynamesys firmware and VESC®-based firmware. Dynamesys firmware can be reinstalled through one of our authorised service partners.
*VESC is a registered trademark by Benjamin Vedder
UK orders
Prices on our website exclude VAT. UK VAT at 20% is added at checkout, and there are no customs charges. Orders ship from our Nottingham workshop by tracked courier.
EU orders: buy through our EU distributor
We do not accept orders for delivery to European Union countries through this website. Customers in the EU can buy RFLX controllers from our EU distributor, Torque Sphere GmbH (Berlin, Germany). Torque Sphere sells in euros and handles VAT and delivery within the EU, so there is no import paperwork or customs charge for you to deal with.
Orders placed with Torque Sphere are contracts with Torque Sphere GmbH, and their terms and conditions, returns policy and warranty arrangements apply. This does not affect your statutory rights as an EU customer.
Buy RFLX CORE from Torque Sphere →
Orders outside the UK and EU: Delivered at Place (DAP)
We ship international orders DAP (Delivered at Place). We arrange and pay for transport to your door, and the courier charge is shown at checkout. Import duties, import taxes and customs clearance charges are paid by the receiver and are not included in our prices. The courier will contact you for payment before or on delivery.
| Charge | Who charges it | Typical amount |
|---|---|---|
| Shipping | Dynamesys, at checkout | Shown at checkout, based on weight and destination |
| Import VAT / GST | Your country’s customs authority | Your local rate, e.g. 25% in Norway, 8.1% in Switzerland, 10% GST in Australia. Usually calculated on the goods value plus shipping plus any duty |
| Import duty | Your country’s customs authority | Depends on the product’s tariff code and your country, often 0–5% for electronic control equipment. Goods of UK origin may qualify for reduced or 0% duty where the UK has a trade agreement with your country |
| Courier customs fee (also called disbursement, brokerage or advancement fee) | The courier, for paying the duty and tax on your behalf | Usually a fixed fee of about £10–£25, or a small percentage of the duty and tax, whichever is higher |
| Local or extra charges | The courier or customs | Only if a shipment is held, for example storage charges if payment or paperwork is delayed |
VAT-registered businesses can usually reclaim import VAT through their normal VAT return. Duty and courier fees are usually not reclaimable.
To clear customs without delay, please provide the following when you order. You can add it to the order notes or email it to info@dynamesys.com.
Every international shipment includes a commercial invoice showing:
This gives your customs broker everything they normally need.
Dynamesys Workbench is supplied with every controller. When you purchase a device, we’ll email you a secure download link along with installation instructions, so you can set up and configure your controller as soon as it arrives.
If you haven’t received your download email within 24 hours of placing your order, please check your spam or junk folder. If it isn’t there, contact us at info@dynamesys.com with your order number and we’ll send you a new link straight away.
Scan for the user manual
Type:
Control Modes:
Motor Start-up:
Input Voltage Range:
Absolute Max Voltage
Battery Recommendations:
Phase Current:
Operating Temperature:
Dimensions:
Weight:
Enclosure / Housing:
Terminals:
Current Sensing:
Onboard Encoder:
IMU:
ADC / Analogue Inputs :
Hall / Encoder / Temperature Inputs
CAN:
USB:
Other Inputs:
Enable Circuitry:
Outputs (DC-DC):
Rugged, fully potted IP67 design for continuous currents up to 100 A and peaks above 200 A. Aimed at cargo bikes, e-bikes, quadricycles, AGVs and agricultural automation.
FIRMWARE FEATURES
Dynamesys Workbench
Workbench reads your motor’s parameters automatically, plots signals live at high rates, captures on a trigger and exports what you measured. Your download link comes with your order.
This controller is the starting point. We design and build our controllers in-house, so we can change them for you.
